near Port Jervis, New York · 18 holes

The Lynx at River Bend Golf Club

par 72 · 5,996 yd measured · 45 bunkers · water in play on 10 holes · 163 ft of climb

Loading the course…

Holes · par

18 · 72

4 par 3s · 10 par 4s · 4 par 5s

Length

5,996 yd

measured along each hole's centerline

Bunkers

45

0.8 acres of sand

Water

10 holes

3.2 acres of water on the property

Climb

163 ft

uphill walking, tee to green; 414–482 ft elevation

Average green

3,785 sq ft

Green to next tee

2,114 yd

walked between holes, in total

Property

121 acres

Scorecard, as mapped

Yardage is measured along the centerline drawn on the map, tee marker to the middle of the green, so it runs a little short of the card from the back tees. Rise is the green's elevation minus the tee's; bunkers are those within 50 yards of the line.

HoleParHcpMeasured ydRise ftBunkersWaterShape
15–440-153●
24–387-202–
34–364+24–sharp dogleg right
44–318-34●
55–388+144–
63–163-122●
74–328-14–
84–360+77–slight dogleg right
93–186+32–
Out362,934↑883
104–399-146●
114–355+29●
123–153-33–
134–368-23●dogleg right
143–82+24●
154–327+31●dogleg left
165–497+23●
174–386+32–slight dogleg right
185–495-56●
In363,062↑757
Total725,996↑16310

What stands out on the map

Longest hole
No. 16, 497 yd par 5
Par 3s
4, from 82 yd (No. 14) to 186 yd (No. 9)
Most bunkers near the line
No. 11, 9
Biggest drop to the green
No. 2, -20 ft
Doglegs
No. 3 (sharp dogleg right), No. 13 (dogleg right), No. 15 (dogleg left)
Fairway width
23 yd on No. 2 to 66 yd on No. 15, averaged over each fairway's length
Greens
largest 5,205 sq ft (No. 17), smallest 1,665 sq ft (No. 12)

Compare with a course nearby

Courses within 40 miles

About this page's data

Geometry © OpenStreetMap contributors (ODbL), extract of October 15, 2026 — this course on OpenStreetMap. Elevation from USGS 3DEP via AWS Terrain Tiles; imagery USGS The National Map and USDA NAIP. Course ratings, slope, green fees and conditions are not on this site because no open source publishes them. How each number is measured · Report a problem